Controlling hydrogen IN-SITU was considered impossible. With the new hydrogen analyzer Never again!
For the first time in the world, NEO Monitors (http://neomonitors.com/) has developed a hydrogen analyzer for in situ hydrogen measurement using the TDLS (Diode Laser Absorption Spectroscopy) method. The underlying technology has already been successfully used in multiple industrial applications.
Our new product, LaserGas™ II SPH2, opens a horizon to new opportunities in process control. With exceptional response time. What’s more, the cost of control will be significantly reduced compared to traditional methods.
Fig. 1 LASER GAS II SP (in-situ)
LaserGas ™ II SPH2 together with LaserGas ™ II MPH2, a MULTI-PASS extractive solution for applications where more sensitivity is required or where an in situ solution is not feasible.
Fig. 2 LASER GAS II MP (extractive)
– Neo Monitors CEO Ketil Gorm Paulsen says: “We have been working towards this moment for years, building step by step. It was an almost impossible goal but we achieved it!”
The hydrogen molecule (H2) has long been considered to be non-absorbable in the infrared band. This theory was incorrect. By redesigning our analyzers, we have achieved unprecedented sensitivity at the minimum absorption levels required in a Hydrogen analyzer.
“Our new analyzer is the perfect solution for a wide variety of applications and, in turn, opens up opportunities for better process control in reactive, toxic and corrosive gas streams,” says Paulsen.
Real-time measurement.
Our new solution for in-situ hydrogen measurement can be applied in any chemical plant or refinery. Wherever you are. The oil and gas industry and other chemical producers will benefit from real-time measurement of hydrogen levels.
LaserGas™ II SP and MPH2 offer continuous control and monitoring of hydrogen concentrations with a response time of less than 2 and 20 seconds, respectively. The solution maintains all the advantages of proven, flexible and reliable LaserGas™ technology. LaserGas™ II SP and MPH2 can detect leaks and increase the efficiency of control processes by increasing safety.
LaserGas™ II SP and MPH2
LaserGas™ II SP and MPH2 solutions will ensure trouble-free operation management. Both for refineries and chemical plants. This is due to their fast response time and minimal maintenance requirements. Our new analyzers can be used to detect leaks, improve process control and in a wide range of other applications where continuous and accurate hydrogen monitoring is required. Ultimately, LaserGas™ IIH2 may be the direct reason why accidents are prevented, as Paulsen details.
LaserGas™ technology has no zero drift, has the option to control the laser’s good performance and does not require any consumables. This means that the maintenance cost is very low for our new analyzers.
Most LaserGas™ II SP and MP’s hydrogen analyzers include:
–In situ and extractiveH2 control
–H2 detection in open spaces
– Applicable for complex and variable gas matrices.
– No field calibration is required.
Contact us at any questions about the operation of these analyzers and solutions for on-site hydrogen measurement. Our team of experts in gas analysis will advise you technically to find the most appropriate solution.
